Exposed wire tolerance limit

1.The applicable products

This document is applicable to the products in which the windings shall be epoxy coated.

2. Exposed wire tolerance limit

(1) A＞1/2C → NG

(2) For Dimension B

For the products,H≤2.0mm, B is no need to control

For the products,H＞2.0mm, B＞1/2H → NG

(3) The total exposed wire shall be below 1/2 of the epoxy coating area. 

(4) Inductance value shall be within the specification.

(5) Especially for the product series 14F, ONLY 2 items (3) and (4) listed above are 

required to meet.